What do you need for a bed in Terraria? How do you set a spawn point in a bed? And how do you make a loom in Terraria? This short article is going to talk about these questions.

How to make a bed in Terraria

Before you go to the sawmill, you will need 5 silk and 15 wood to make a basic bed. If you swap the wood out for other resources like bone, glass, money, and much more, you can make special beds out of those materials. While wood can be found by chopping down any surrounding trees, the 5 silk can take a little more time. To make the 5 silk, you will need to find 35 cobwebs (7 cobwebs per one piece of silk). After you have the required cobwebs, you can make the silk in your loom.

How to make a loom in Terraria

Now you have the cobwebs you can turn them into silk. However, you’ll need to make up to five different crafting stations: a furnace, anvil, sawmill and, finally a loom. This is of course assuming you’ve already got the work bench which you will have needed to make the tools that got you this far.  First up the furnace: to make a furnace you’ll need 20 stone blocks, four pieces of wood and three torches (which you can make from wood and the gel you get from killing slimes). Once you have the furnace in place you’ll need 15 pieces of iron ore to make five iron bars, which in turn can be used to make an anvil. You’ll find iron, which is greyer than stone, easily enough, poking through the surface or just underground. With the anvil you can make 10 chains from another single iron bar (so you’ll need another three iron ore). Once you’ve got 10 wood, two more iron bars and a chain you can make a sawmill, which in turn you can use to make a loom from 12 wood. Congratulations, you can now use the loom to turn 35 cobwebs into 5 silk. Once you have all that, take the wood and silk to the sawmill from earlier and make a bed.

Setting player spawn point

Pressing ⚷ Open / Activate on the foot of a bed, when it is placed in a valid room, sets the player's spawn point to that bed. This is signified by the status message "Spawn point set!" When the same is done on a bed that has already been set as the player's spawn point, the status message "Spawn point removed!" is shown, and the player's spawn point is set back to the world's default. For a bed to function properly as a spawn point, it must be in a valid room. Other than the bed itself, no other furniture or lighting is required. There must also be clear space at the head of the bed for the player to stand. A bed may be placed in a non-rectangular room, as long as the leftmost 3 tiles immediately above it are left clear. For example: There may be a bed (4×2) surrounded by blocks on the left, right, and bottom, and above the foot of the bed, as long as there is space for the player to spawn at the head of the bed.

Have you already grasped these ways? Why not take them into practice, and make your own bed in Terraria? For more Terraria News guide, please stay turn to Z2U.com.